Brand : Epson
Model No : Epson FX 890II Monochrome Dot Matrix Printer
Printer Type : 9-pin, serial impact dot matrix
Control Panel : Functions: Font, Pitch, Pause, Tear-Off/Bin selection, Line Feed/Form Feed, Load/Eject, Micro-Adjust, Reset, Self Test, Data Dump, and Default Setting selection
Print Direction : Bidirectional logic seeking for text and graphics printing, Unidirectional text or graphics printing can be selected using software commands.
Printing Method : Impact dot matrix
Print Speeds : Ultra Speed Draft: 738 cps (12 cpi), 615 CPS (10 cpi), High Speed Draft: 612 CPS (10 cpi), Letter Quality: 115 CPS (10 cpi)
Number of Pins in Head : 9 pins
Paper Width : Single sheets: 9.91cm to 25.65cm, Continuous: 10.16cm to 25.4cm, Cut-sheet feeder: 18.29cm to 21.59cm
Total Print Volume : 52 million lines (not including printhead)
Printhead Life : 400 million characters at 14 dots / character
Ribbon life : 7.5 million characters at 14 dots / character
Mean Print Volume Between Failure (MVBF) : 52 million lines (except print head)
Mean Time Between Failure (MTBF) : 25,000 Power On Hours (POH) (25 Duty)
Paper Path : Manual Insertion: Manual insertion: Front or rear in, top out
Push Tractor : Cut sheet feeder: Rear in, top out
Pull Tractor : Tractor: Front, rear or bottom in, top out
Cut Sheet Feeder : Pull push tractor: Front or rear in, top out
Cut Sheet (Single Sheet) : Width: 9.906cm to 25.654cm, Length: 9.906cm to 36.322cm
Continuous Paper (Single Sheet / Multi-part) : Width:10.16cm to 25.4cm, Length: 101.6 - 558.8 mm | (4.0 - 22.0), Width: 101.6 - 406.4 mm | (4.0 - 16.0), Thickness: 0.065 - 0.46 mm | (0.0025 - 0.018)
Continuous Paper (Multi-part Forms) : Continuous multipart, original + 5 carbonless copies, 1 + 6 copies with pull tractor, maximum thickness 0.04572cm
Cut Sheet Size : Width: 18.288cm to 21.59cm, Length: 25.654cm to 35.56cm
Line Spacing : 6 lines per inch default
Rated Voltage : AC 100 V to 240 V
Rated Frequency : 50 to 60 Hz
Acoustic Noise : 55 dB(A)
Input Data Buffer : 128KB
